Updates | Becquerel Industries Pvt Ltd in Nagpur India ,M/S. BECQUEREL INDUSTRIES PVT. LTD is one of the leading NDT and Geotechnical Engineering Consulting firms in India. Established in 1996. We have successfully completed over 5000 projects across India. During this time, we have grown from a small startup to a professional organization employing a staff of over 150 persons. We have established our reputation as a company committed to providing engineering solutions to complex NDT & Geotechnical problems as well as developing economic and safe designs for foundations and soil-related problems. Our project line-up includes major thermal power plants and solar power plants, refineries, bridges & highways, commercial & residential infrastructure, metro & railways, etc. On behalf of the M/s. Becquerel Industries Pvt. Ltd family, we look forward to our business association, and hope to work with you soon. OUR COMMITMENT Our commitment to excellence in NDT & geotechnical engineering is reflected in the quality of our works. We are members in national forums such as Indian Geotechnical Society, Association of Consulting Civil Engineers, Indian Roads Congress, Indian Society of Rock Mechanics & Tunneling Technology, and Consulting Engineers Association of India. M/s. Becquerel Industries Pvt. Ltd is regularly involved in organizing several workshops, seminars and conferences, aimed at promiting knowledge sharing and dissemination. OUR ACTIVITIES Our field of specialization is “NDT & Geotechnical Engineering”, which includes soil mechanics, rock mechanics, foundation engineering, pile foundations, soil improvement, foundation testing, etc. We have the capability to carry out various geotechnical works; including:- 1. Geotechnical Investigations • Geological Appraisal of Sites • Soil Borings & Rock Drilling • Static & Dynamic Cone Penetration Test • Pressuremeter Test • Static & Cyclic Plate Load Test • Pump out Test • Field Permeability & Percolation Test • In-situ Vane Shear Test • Block Vibration Test 2. Geophysical Investigations • Cross-hole Seismic Test (CHST) • Down-hole Seismic Test (DHST) • Electrical Resistivity Test (ERT) • Seismic Refraction Test (SRT) • Parallel Seismic Test (PS) • Spectral Analysis of Surface Waves (SASW) 3. Topographic & Hydrographic Surveys 4. Foundation Testing • Static & Cyclic Pile Load Test • Static & Cyclic Plate Load Test • High-strain Dynamic Pile Load Test • Low-strain Pile Integrity tests • Cross-Hole Sonic Logging (CHUM) • Anchor Pullout Tests • Bridge load test 4. Non-Destructive Testing • Ultra sonic pluse velocity (USPV) • Half cell Potential test • Rebound hammer • carbonation 5. NABL Scope of Laboratory Testing (NABL / ISO: 17025 accredited Laboratory) • NABL / ISO: 17025 accredited central Laboratory in Nagpur • Ability to establish mobile / project laboratories • Building Material o Aggregate o Sand o Cement o Steel o Bricks o Fly Ash • Soil & Rock • Chemical (Aggregate, steel, water, cement, Admixture etc.) • Core Cutting 1. Geotechnical Investigations • Geological Appraisal of Sites: - Accurate geological site appraisal and assessment are fundamental to the design and risk management of any proposed development. Understanding the rocks in the sub-surface through expert data collection and 2D interpretation allows a thorough assessment of potential risks associated with minerals reactivity, materials quality and potential subsidence. Geological appraisal through field mapping, characterisation, modelling and detailed assessment is fundamental to risk reduction for site development. • Soil Borings & Rock Drilling:- • Static & Dynamic Cone Penetration Test • Pressuremeter Test: - The pressuremeter test is an in-situ testing method used to achieve a quick measure of the in-situ stress-strain relationship of the soil & rock. the pressuremeter test is performed by applying pressure to the sidewalls of a borehole and observing the corresponding deformation. • Static & Cyclic Plate Load Test: - The plate load test is a semi-direct method to estimate the allowable bearing pressure of soil to induce a given amount of settlement. Plates, round or square, varying in size, from 30 to 60 cm and thickness of about 25 mm are employed for the test. The load on the plate is applied by making use of a hydraulic jack. The reaction of the jack load is taken by a cross beam or a steel truss anchored suitably at both the ends. The settlement of the plate is measured by a set of two or more dial gauges of sensitivity 0.02 mm. • Pump out Test • Field Permeability & Percolation Test • In-situ Vane Shear Test: the vane test can be used as a reliable in-situ test for determining the shear strength of soft-sensitive clays. It is in deep beds of such material that the vane test is most valuable, for the simple reason that there is at present no other method known by which the shear strength of these clays can be measured. • Dynamic Pile Load: The Dynamic Pile Load test is based on a large falling weight giving the dynamic impact to the elastic body. It equates the energy of hammer blow to work done in overcoming the resistance of the founding strata to the penetration of the ordinary cast in situ piles as well as grouted micropiles. Allowance is made for losses of energy due to the elastic compression of the pile, and subsoil as well as losses caused by the impact of the pile. The Modified Hiley’s formulae given in the code I.S. 2911 part –1, Section I is used in estimating the ultimate driving resistance in tonnes. Applying the factor of safety as outlined in code the safe load on pile can be worked out.

Radiography Testing :-

Industrial radiography i...

Radiography Testing :- Industrial radiography i...

Feb 18th, 2018 5:21 PM

Macroetching is done by etching a suitably prepare...

Macroetching is done by etching a suitably prepare...

Feb 18th, 2018 5:12 PM

Microstructure Test :-
Microstructure Analysis, t...

Microstructure Test :- Microstructure Analysis, t...

Feb 18th, 2018 5:06 PM

Impact test ( Charpy V- Notch Test ):-

The Charp...

Impact test ( Charpy V- Notch Test ):- The Charp...

Feb 18th, 2018 4:59 PM

Steel Physical Test

Bend Test :-
deform the tes...

Steel Physical Test Bend Test :- deform the tes...

Feb 18th, 2018 4:56 PM

Steel Mechanical Test

Tensile Test :-

Tensile ...

Steel Mechanical Test Tensile Test :- Tensile ...

Feb 18th, 2018 4:51 PM

K- value Test ( Module of subgrade Reaction)

K- value Test ( Module of subgrade Reaction)

Feb 18th, 2018 4:34 PM

Aggregate Crushing Value

Coarse aggregate crushi...

Aggregate Crushing Value Coarse aggregate crushi...

Feb 18th, 2018 3:41 PM

Coarse Aggregate Testing

Aggregate Crushing Value...

Coarse Aggregate Testing Aggregate Crushing Value...

Feb 18th, 2018 3:28 PM

Coarse Aggregate Test:-

Loss Angles Abrasion val...

Coarse Aggregate Test:- Loss Angles Abrasion val...

Feb 18th, 2018 3:25 PM